Advertisement
Available languages
Available languages
GB
User Manual
User Manual
Contents
• Safety
• Product Overview
• Batteries and Power
• Operation
• Accuracy Check and Calibration
• Specifications
User Safety
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death or
serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal injury
which, if not avoided, may result in property damage.
If you have any questions or comments about this or any
dewalt tool, go to www.dewalt.com on the Internet.
WARNING:
Read and understand all instructions. Failure to
follow the warnings and instructions may result in
electric shock, fire and/or serious injury.
SAVE THESE INSTRUCTIONS
WARNING:
Laser Radiation Exposure. Do not disassemble
or modify the laser level. There are no user
serviceable parts inside. Serious eye injury
could result.
6
WARNING:
Hazardous Radiation. Use of controls or
adjustments or performance of procedures other
than those specified herein may result in hazardous
radiation exposure.
The label on your tool may include the following symbols.
V
volts
mW
milliwatts
laser warning symbol
nm
wavelength in nanometers
2
Class 2 Laser
Warning Labels
For your convenience and safety, the following labels are
on your laser.
WARNING: To reduce the risk of injury, user
must read instruction manual.
WARNING: LASER RADIATION. DO NOT
STARE INTO BEAM. Class 2 Laser Produc
•
Do not operate the laser in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
• Use the laser only with the specifically designated
batteries. Use of any other batteries may create a risk
of fire.
•
Store idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
•
Use only accessories that are recommended by the
manufacturer for your model. Accessories that may be
suitable for one laser, may create a risk of injury when used
on another laser.
•
Tool service must be performed only by qualified
repair personnel. Service or maintenance performed by
unqualified personnel may result in injury. To locate your
nearest DeWALT service center go to www.dewalt.com on
the Internet.
•
Do not use optical tools such as a telescope or transit
to view the laser beam. Serious eye injury could result.
•
Do not place the laser in a position which may cause
anyone to intentionally or unintentionally stare into the
laser beam. Serious eye injury could result.
•
Do not position the laser near a reflective surface which
may reflect the laser beam toward anyone's eyes.
Serious eye injury could result.
•
Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
•
Do not modify the laser in any way. Modifying the tool
may result in hazardous laser radiation exposure.
•
Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may
result.
•
Do not remove or deface warning labels. If labels
are removed user or others may inadvertently expose
themselves to radiation.
•
Position the laser securely on a level surface. Damage
to the laser or serious injury could result if the laser falls.
Laser Information
•
The DCE089G, DCE089R 3-Beam 360° Line Laser and
the DCE0811G, DCE0811R 2-Beam 360° Line Laser are
Class 2 laser products. The lasers are self-leveling laser
tools that can be used for horizontal (level) and vertical
(plumb) alignment projects.
WARNING:
Read and understand all instructions. Failure to
follow all instructions listed below may result in electric
shock, fire and/or serious personal injury.
Work Area
•
Keep your work area clean and well lit. Cluttered benches
and dark areas invite accidents.
•
Do not operate laser tools in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
•
Keep children and bystanders away while operating a laser
tool. Distractions can cause you to lose control.
Electrical Safety
•
Use battery operated tool only with the specifically
designed batteries. Use of any other batteries may create
a risk of fire.
Product Overview
•
WARNING:
Never modify the tool or any part of it. Damage to the
laser or personal injury could result.
Figure 2 -
A
Battery Interface
Figure 1A -
B
Pendulum Lock
Figure 1B -
C
Keypad
Figure 1B -
D
ON/OFF button: horizontal laser line
Figure 1B -
E
ON/OFF button: side laser line
Figure 1B -
ON/OFF button: front vertical laser line
F
(DCE089R/G only)
Figure 2 -
G
Magnetic pivot bracket
Figure 4 -
I
Tripod thread fitting (1/4 - 20 & 5/8 -11)
Figure 1B -
J
Battery level indicator
Figure 5 -
K
Ceiling Mount Clamp
Figure 5 -
L
Ceiling Mount
Figure 5 -
M
Screw Hole
Batteries and Power
•
This tool is powered by the following DeWALT 10.8V Battery
packs: DCB120, DCB127 or may also be powered using the
DEWALT AA Starter pack which can carry 4 x AA batteries.
Note: The AA starter pack is recommended only for use with
the red laser.
Battery Installation / Removal
Using the AA Starter Pack:
CAUTION:
The AA starter pack is designed specifically for
use only with the DeWALT 10.8V compatible laser
products and cannot be used with any other tools Do
not attempty to modify the product.
7
Advertisement
