Siemens Micromaster 420 Operating Instruction page 86

International English
Parameter
Number
P2205
Fixed PI setpoint 5
Refer to the description in P2201 for Fixed Setpoint 1.
P2206 Fixed PI setpoint 6
Refer to the description in P2201 for Fixed Setpoint 1.
P2207 Fixed setpoint 7
Refer to the description in P2201 for Fixed Setpoint 1.
r2224 CO: Fixed PI setpoint
Displays the total output of the PI fixed setpoint selection.
P2231 Setpoint Memory of the Motorized Potentiometer (Keypad Setpoint)
0 = setpoint memory disabled.
1 = setpoint memory enabled.
If 0 is selected, the setpoint returns to the value set in P2240 after an OFF command. If 1 is
selected the active setpoint is remembered and P2240 is updated with the current value.
Refer to P2240.
P2232 Inhibit rev. dir. PI-MOP setp.
Inhibits the reverse setpoint selection when keypad (Motorized Potentiometer) is chosen
either as main setpoint or additional setpoint (using P1000)
Possible settings:
0 Reverse direction is allowed – it is possible to change motor direction using the
keypad (Motorized Potentiometer) setpoint (increase / decrease frequency either by
using digital inputs or keypad up / down buttons)
1 Reverse direction inhibited
P2240 Setpoint PI-MOP
Allows the user to set a digital PI setpoint in %. The setpoint can be changed either by using
∆∇
the keys on the BOP or by setting P0702 or P0703 to 13 and 14.
r2250 CO: Source of PI setpoint
Displays the active digital PI setpoint in %.
P2253 CI: PI setpoint
86
Parameter Name
5. SYSTEM PARAMETERS
Min
Max
[Default]
Units
-130
130
[40]
%
-
-130
130
[50]
%
-
-130
130
[60]
%
-
-130
130
[60]
%
-
0
1
[0]
-
0
1
[1]
-
-130
130
[10.00]
%
-130
130
[10.00]
%
0
2248.0
[0]
-
MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
♦ ♦ ♦ ♦ P0003 User
Access Level
♦ ♦ ♦ ♦ P0004 Setting
♦ ♦ ♦ ♦ Changeable
♦ ♦ ♦ ♦ Status
2
22
'•'
2
22
'•'
2
22
'•'
2
22
2
22
'•'
2
10
2
22
'•'
2
22
'•'
2
22
'•'