Siemens Micromaster 420 Operating Instruction page 70

International English
Parameter
Number
P1040 Setpoint of the MOP
Determines Setpoint for Keypad (Motor potentiometer) control (P1000=1).
Note:
If Keypad (Motor potentiometer) setpoint is selected either as Main setpoint or Additional
setpoint then the reverse direction will be inhibited by default using P1032. If you want to
re-enable reverse direction then set P1032 = 1.
P1058 JOG frequency right
Jogging is used to advance the motor by small amounts. It is controlled via the jog button or
using a non-latching switch on one of the digital inputs.
While jog right is selected, this parameter determines the frequency at which the inverter
will run. The up and down ramp times used while jogging are set in P1060 and P1061
respectively.
P1059 JOG frequency left
While jog left is selected, this parameter determines the frequency at which the inverter will
run.
P1060 JOG ramp-up time
Sets ramp-up time. This is the time used while jogging or when the function "use jog ramp
times" is activated.
f max
(P1082)
70
Parameter Name
f (Hz)
0
Jog Ramp up time (P1060)
5. SYSTEM PARAMETERS
Min
Max
[Default]
Units
-650
650
[5]
Hz
0
650
[5]
Hz
0
650
[5]
Hz
0
650
[10]
s
time (s)
MICROMASTER 420 Operating Instructions
6SE6400-5AA00-0BP0
♦ ♦ ♦ ♦ P0003 User
Access Level
♦ ♦ ♦ ♦ P0004 Setting
♦ ♦ ♦ ♦ Changeable
♦ ♦ ♦ ♦ Status
2
10
'•'
2
10
'•'
2
10
'•'
2
10
'•'