Siemens HiPath 3000 Service Manual page 1056

fcodes.fm
Codes for Activating/Deactivating Features
Table B-1 Codes for Activating/Deactivating Features
TDM workpoint
clients without
display,
CMI mobile
phones,
analog work-
point clients
Feature
Trunk queuing, –
automatic
Trunk queuing, –
manual
Toggle *2
DTMF trans- *53
mission
DTMF trans- –
mission prior
to connect
Microphone off *52
(mute on) (if microphone
available)
Abbreviations:
●
Call states: RH = idle, BR = ready, WA = digit input, BS = busy, RK = incoming call, RG = outgoing call, GS = call
●
Key programming: V = key can be programmed with complete feature, U = key can be programmed to start procedure, T = key with
toggle functionality
●
Menu level: H = Main menu, U1 = 1st submenu, U2 = 2nd submenu
B-12
Operating procedure for
TDM workpoint clients with
S work- display,
0
point cli- CMI feature mobile phones,
ents IP workpoint clients,
optiClient 130 V5.0 phone
1
Key
– – –
– – –
– *2 –
– *53 –
– – –
– *52 X, V, T
T
optiCli-
optiCli-
ent 130
ent 130
V5.0
easy-
office
Com
Menu
V – –
V BS – –
V GS U1 Mouse
click,
Key
U – H Menu,
key feature
– – – –
GS U1 Local
active
menu
HiPath 3000 V5.0, HiPath 5000 V5.0, Service Manual
Sup-
ported
Locking of
work-
feature
V5.0
point
clients
(see
abbre-
via-
tions
in
Table
B-2)
– E, N, C X RH,
BR,
RG,
RK,
GS
– D X RH,
BR,
RG,
RK,
GS
Local D, E, N, – –
active C
menu
Local D, E, N, – RH,
C BR,
WA,
RG,
RK,
BS
– D, E, N, – RK,
S BS
Local D, E (if – –
active micro-
menu phone
is avail-
able)
P31003-H3550-S403-4-7620, 02/05
Note
Automatically af-
ter timeout if en-
abled in the CDR
Activation by
pressing a key if
enabled in the
CDR
Also available us-
ing the DSS,
GESP, LTG and
MUSAP key.
Only permitted in
ISD/SSD mode
and from the ENB.
Switchover per-
formed using #key
Unavailable for
workpoint clients
without a speaker-
phone if handset is
on-hook