Epson FX-80 User Manual page 348

G
Graphics
advanced in memory, 170, 171, 174, 183
changing density of, 175
columns for, 128, 129-130, 131
controlling size and shape through program loops, 184
line, 223, 226, 275
line spacing, 139
pattern design, 151, 152, 156, 158-166
plotter, 167
width of, 135, 188-189
Graphics Mode, 128-130, 257, 268.
ESCape "K" CHR$(n1) CHR$(n2) selects Graphics Mode; n1 and n2
determine the number of columns reserved for graphics.
High and Low-Speed Double-Density graphics, 143, 145, 260, 261, 267, 268
Nine-Pin, 149-150, 262, 268.
ESCape
"A"
CHR$(d) CHR$(n1) CHR$8n2) sets 9-pin.
problems with, 292
Quadruple-Density, 145-146,262,268
seven-bit computers, 128, 130, 280
seven different densities, 146-148, 257, 268
ESCape "*" CHR$(m) CHR$(n1) CHR$(n2) enters one of 7 graphics
modes.
Grid,35.
See also dot matrix.
H
Half-Speed Mode, 75,263,266.
ESCape "s1" turns it on; ESCape "sO" returns it to normal.
HEX Dumping, 280-281
Humidity, 304
HX-20 and printer commands, 24
IF-THEN statements, 140
Immediate print mode, 75, 262, 266.
I
ESCape "il" turns it on; ESCape "iO" turns it off.
Insulation resistance, 304
Interfaces 3, 305, 307-310
International character sets, 16, 71-75,206,207,208,261,266,296.
ESCape "R" CHR$(n) selects one.
See also ASCII codes
Italic Mode, 57, 59, 258, 265.
ESCape "4" turns italic character set on; ESCape "5" turns
it
off.
LET Statement, 170
Lights, 2, 18
Line Feed, 18, 255, 263, 266.
318
CHR$(10) produces it.
in BASIC, 92
commands, 82, 89
and computer interface, 17
and DIP switch, 14, 16, 297
L