Epson FX-80 User Manual page 327

Figure K·1. Factory setting of the DIP switches.
Examining the Switches
Switches 1-6, 1-7, and 1-8 determine the active international char-
acter set as shown below:
SWl-6 SWl-7 SWl-8
COUNTRY
ON ON ON USA
ON ON OFF FRANCE
ON OFF ON GERMANY
ON OFF
OFF
ENGLAND
OFF ON ON DENMARK
OFF ON OFF SWEDEN
OFF OFF ON ITALY
OFF OFF
OFF SPAIN
See Chapter 6.
Switch 1-5: When ON, Emphasized Mode becomes the default.
When OFF, normal (Pica) is the default mode. All switch modes are
overridden by software commands.
Switch 1-4: When ON, makes a 2K communications buffer available.
When OFF, memory can be used for user-defined characters.
Switch 1-3: When ON, paper-out detection is deactivated, and print-
ing will continue when paper is out (printer stays on-line). When OFF,
printing stops when paper is out, and bell sounds if switch 2-2 is on.
Switch 1-2: When ON, a slashed 0 is printed. When OFF, a normal 0
is printed.
296