Epson FX-80 User Manual page 345

Connector Pin assignments, 307-308
Control codes. See specific modes and functions
listed numerically, 255-264
listed by function, 205-268
for PX compared with MX, 277-278
Hex dumping, 279-282
printed as characters, 206
Covers, 1, 2, 4
o
Data statement, 60, 151-152, 153, 157, 199
Data Transfer sequence, 309-310
Debugging a program, 280-282
Default settings, 16, 295-297
DELete, 30, 31, 33, 256, 263, 266
CHR$(127) deletes.
Device controls 256, 263
Dielectric strength, 304
DIP switches, 14-17,295-297
and Compressed Mode 16,40-41,297
and line feed, 17, 297
and paper-out sensor, 17, 98
and RAM for user-defined characters, 196
reversed from MX, 17
and Skip-Over-Perforation, 98
Dot-matrix, 35-38
in dot graphics, 127-128
patterns for character fonts, 36, 37, 38, 243-248
Double-Strike Mode, 47-48, 52, 259, 265
ESCape "G" turns it on; ESCape "H" turns it off.
E
Elite Mode. 38-39, 260, 261, 265
ESCape "M" turns it on; ESCape "P" turns it off.
and large, user-defined characters, 220
Master Select, 58-61
other modes, 41, 42, 53-54, 269-272
Emphasized Mode, 49-50, 259, 265
ESCape "E" turns it on; ESC "P" turns it off.
and DIP switch adjustment, 16,296, 297
Double-Wide User-Defined Characters, 212
Master Select, 58-6]
mixed with other modes, 52, 53,269-272
and ribbon life,
so
Error detection, 279-285
ESCape Codes.
ESCape
=
CHR$(27).
listed numerically, 255-264
listed by function, 265-268
See also under specific modes and functions
and ASCII characters, 32-33
and high-order version, 77
ESCape "!" CHR$(n). Master Print Mode Select. See also Master Select.
ESCape
"#".
Accepts the eighth bit "as is" from the computer. See Bit, high-order.
ESCape
"%"
CHR$(n1) CHR$(n2). Selects a character set. See ASCII codes; User-
Defined characters.
315