Epson FX-80 User Manual page 331

Another option-for those who use foreign characters in their cor-
respondence-is to select the appropriate country with switches 1-6,
1-7, and 1-8. Eight of the 9 countries can be selected (all except Japan)
according to the chart in Appendix K. This will work as long as your
word processor can send out the required codes. See Chapter 6 .
. Single-Sheet Forms
For extensive use of forms or letters that require a single sheet of
letterhead paper, you can deactivate the paper-out sensor by turning
switch 1-3 on. This will keep the printer from shutting down before it
reaches the end of the page. By causing the printing to pause at the end
of a page, you will have time to insert the next sheet. (Some word
processors pause automatically after each page.)
BASIC Program Listings
Set switch 1-2 ON to print all Os with slashes. Set switch 2-3 ON or
use (ESC) "N"CHR$(n) to activate the skip-over-perforation feature.
Quiet
~rinting
The protective lid dampens the noise output. The Half-Speed Mode
can be activated with (ESC) "sl" -this also cuts down on the noise
level. And for those late night sessions, you may wantto tum the bell
off by turning switch 2-2 OFF.
Graphics and User-Defined Characters
Set switch 1-4 OFF to enable you to define characters.
300