Using The Dc In 12V Terminal; Checking The Camera's Power Levels - Canon EOS C700 Instruction Manual

Using the DC IN 12V Terminal

1 Press the Q button to turn off the camera.
2 Connect the 4-pin XLR connector of the external power
supply to the camera's DC IN 12V terminal.
IMPORTANT
• Make sure to turn off the camera before connecting or
disconnecting an external power source to/from the
camera's DC IN 12V terminal.

Checking the Camera's Power Levels

You can check the voltage level of the power source used on the camera's HOME screen and on the shooting
screen that appears on monitoring devices (A 57, 59).
You can use the
independently for the DC IN 12V terminal and battery. When the power input to the camera reaches the
predetermined level, the onscreen power indicator will change to red and a message will appear in the
[LIVE] screen. When using a battery compatible with BMS (battery management system), you can even set the
warning level as a percentage of the remaining battery charge instead of voltage.
[System Setup] > [Low Power Warning] settings to set a critical power level
Preparing the Main Power Supply
27