Canon EOS C700 Instruction Manual page 137

Submenu levels / Menu items
[Level Depend Slope]
[Level Depend Offset]
[Noise Reduction]
[Skin Detail]
[Effect Level]
[Hue]
[Chroma], [Area], [Y Level]
[Selective NR]
[Effect Level]
[Hue]
[Chroma], [Area],
[Y Level]
[Color Matrix Tuning]
[Gain]
[Phase]
[R-G], [R-B], [G-R], [G-B],
[B-R], [B-G]
[White Balance]
[R Gain], [B Gain]
0 (no slope), 1 (steep slope) to 3 (gradual slope) (0)
Determines the slope of the area between the upper and lower parts of the gamma curve.
0 to 50 (0)
Adjusts the sharpness level of dark areas in the image. Setting higher values will lower the sharpness
level.
1 (lowest level) to 12 (highest level), [Off]
Reduces the amount of noise that appears in the image.
[High], [Middle], [Low], [Off]
–16 to 16 (±0)
0 to 31 (16)
The camera applies a softening filter to areas in the picture with skin tones to give a more pleasant
appearance. By changing these settings, you can determine what areas will be detected as skin
tones. A zebra pattern will appear on the monitoring screen over areas of the image that are detected
as having skin tones.
[Effect Level]: Adjusts the level of the filter.
[Hue]: Adjusts the hue for detection of skin tones.
[Chroma]: Adjusts the color saturation for detection of skin tones.
[Area]: Adjusts the color range for detection of skin tones.
[Y Level]: Adjusts the brightness for detection of skin tones.
[High], [Middle], [Low], [Off]
0 to 31 (0)
0 to 31 (16)
The camera detects the characteristics of a certain color or tone and applies a noise reduction filter
to the targeted areas. A zebra pattern will appear on the monitoring screen over areas targeted for
noise reduction.
[Effect Level]: Adjusts the level of the noise reduction filter.
[Hue]: Adjusts the hue for the color to be detected.
[Chroma]: Adjusts the color saturation for the color to be detected.
[Area]: Adjusts the color range for the color to be detected.
[Y Level]: Adjusts the brightness for the color to be detected.
–50 to 50 (±0)
–18 to 18 (±0)
These settings adjust the color intensity ([Gain]) and color phase ([Phase]) of the color matrix,
affecting the color tones of the whole image.
–50 to 50 (±0)
Each matrix changes the tint of the picture along the color gradations detailed below, affecting the
color tones of the whole image.
[R-G]: cyan/green and red/magenta; [R-B]: cyan/blue and red/yellow;
[G-R]: magenta/red and green/cyan; [G-B]: magenta/blue and green/yellow;
[B-R]: yellow/red and blue/cyan; [B-G]: yellow/green and blue/magenta.
–50 to 50 (±0)
These settings adjust the amount of white balance throughout the whole image by changing the
intensity of red tones ([R gain]) and blue tones ([B Gain]).
Options / Additional information
Custom Picture Settings
137