Cleaning the control panel
^ The control panel should only be
cleaned using a damp cloth or with a
proprietary cleaning agent for glass
or plastic surfaces.
An approved and listed disinfecting
agent can be used to wipe surfaces.
,
Do not use abrasive cleaners or
all-purpose cleaners.
Because of their chemical
composition they could cause
serious damage to plastic
components.
Cleaning the front of the
machine
^ The front should be cleaned using a
damp cloth and a small amount of
washing-up liquid, or with a
non-abrasive proprietary cleaning
agent designed for use on stainless
steel.
^ To help prevent resoiling
(fingermarks etc.) a stainless steel
conditioning agent (available from
Miele) can also be used.
,
Do not use any cleaning agents
containing ammonia or thinners as
these can damage the surface
material.
Essential maintenance
,
Never clean the machine or near
the vicinity with a hose or a pressure
washer.
Cleaning the wash cabinet
The wash cabinet is generally
self-cleaning.
However, should a build-up of deposits
occur in the cabinet please contact
Miele for advice.
Cleaning the door seals
The door seals should be cleaned
regularly with a damp cloth to remove
any soiling.
Seals which are no longer tight or which
have suffered damage must be
replaced with new ones by a Miele
technician.
Dispensing systems
When processing chemicals are being
used, they should be monitored
regularly for any dispensing
irregularities.
51