Changing The Temperature Holding Time; Resetting To Factory Default Settings - Miele G 7883 Operating Instructions Manual

Changing the temperature holding time

Step
^ Press button 0 repeatedly, or hold pressed in until
the level of the programme block you wish to change
appears in the display.
^ Turn the programme selector to the programme you
wish to change, e.g. "Custom".
^ Press ß repeatedly or hold pressed in until the
required value appears in the display, e.g. 10.

Resetting to factory default settings

Step
^ Press 0 as often as necessary or hold it pressed in
until E33 appears in the display.
^ Turn the programme selector to a programme.
Factory default setting:
Electronics have been programmed to another setting:
^ Press ß when PP shows in the display.
When resetting the machine to factory default settings, the water softener will
also be reset. It will need to be reprogrammed to correspond to the water
hardness in your area; see "Programming the water softener".
Programme changes which have been made to the freely programmable
Programmes "Custom", "Inorganica" and "Organica" will be kept and will not be
reset.
Programmable functions
Display / Result
E10 for Main wash 1
E13 for Main wash 2
E23 for Final rinse 1
E26 for Final rinse 2
min _ 1
min _ 10
Display / Result
E33
00
PP
00, the factory default
settings have now been
reinstated.
43