Recording Schedule - Edit Motion Detection Settings - Canon VK-16 Setting Manual

Recording Schedule - Edit Motion Detection Settings

You can specify the detection area and the amount of sensitivity for Motion Detection
Recording. The area for detection can also be modified which is ideal, for example, if the
field of view has two entrances and you wish to monitor motion for one entrance.
●
Step 1: Next to "On motion detection", click Settings...
Click to activate motion detection on the Camera Server for
VB-C50i/VB-C50iR, VB-C50FSi and VB-C50Fi.
Select sensitivity
options.
Click and drag a
control point to
re-size the active
region.
Motion detection
level indicator will
increase during
activity.
● If Continuous and Motion Detection recordings are both set,
the pre-event recording is not available.
Note
● Camera Servers have certain features to allow image capture
operations based on sensor input or schedule. If settings are
enabled on the Camera Server, they take precedence over any
settings made in VK-64/VK-16, and your VK-64/VK-16
recording schedules fail to record with the correct camera
preset. You should disable such Camera Server features when
using VK-64/VK-16 to record images.
Select frame rate and pre/post event duration for
recording triggered by motion.
Configure Motion and Sensor Settings
The Motion Detection Settings dialog
opens (The dialog for VB-C300 is
shown below).
Set a priority for events
triggered by motion.
6
Activate external
outputs.
85