Starting The Viewer; Launching Procedure - Canon VK-16 Setting Manual

Starting the Viewer

Launching Procedure

Double-click the VK Viewer desktop icon.
Alternatively, from the Windows Start menu select: Programs > WebView
Livescope > Network Video Recorder VK Series v1.4 > VK Viewer.
The connect option menu (Start-up Screen) is displayed. Select Master Storage Server option and
click Connect.
Start-up Screen
Note
Tip
38
If you want to add a Storage Server to the connect option menu,
login the Storage Server of your choice and click Add Storage
Server in the Viewer Settings window (→ P. 117).
● If multiple Storage Servers are being used, you should decide
which one is the Master Storage Server.
● If the Storage Servers v1.2, v1.3 or v1.4 coexist, either Storage
Server can be specified as the Master Storage Server.
● The Viewer v1.0, v1.1, v1.2, or v1.3 cannot connect to the
Storage Server v1.4.
● If you want to connect to the Storage Server directly without
displaying Start-up Screen when launching, untick When
starting, Master Storage Server is selected in the Viewer
Settings window (→ P. 117).
localhost
Connects to Storage Server
and starts the Viewer.
Select this option to use
the local PC where Viewer
is installed as the Master
Storage Server.
Use IP address
Connects to Storage Server
and starts the Viewer by
specifying its IP address.
Select this option when the
Storage Server and the
Viewer are installed on
separate PCs.
Not use Storage Server
Select this option to use
the Viewer only without
connecting to a Storage
Server.