Canon VK-16 Setting Manual page 83

● The additional option is only allows to use with VB-C300.
Other models cannot use these options.
Note
● If the Exposure box is ticked, the Backlight compensation
option will be disabled.
●
Add/Edit Schedule Item dialog - External Outputs Setting
Click Setup... to change the details of external outputs. Otherwise the default
2
settings will be used.
For the VB-C300, only one external device can be configured on
the Control External Devices dialog.
Tip
Click OK to save the new settings and close the dialog.
Click Cancel to discard the new settings.
When you click OK, the Preset and Backlight settings are effective on Video Windows in
the Viewer. Control the camera as required by clicking Camera Control.
If you have not finished, proceed to the following pages which outline the dialogs used for
Sensor Event and Motion Detection recording.
Camera Servers have certain features to allow image capture
operations based on sensor input or schedule. If settings are
Note
enabled on the Camera Server, they take precedence over any
settings made in VK-64/VK-16. This may cause some confusion if
your VK-64/VK-16 recording schedules fail to record with the
correct camera preset. You should disable such Camera Server
features if you wish VK-64/VK-16 settings to take precedence.
Configure Normal Recording
Click the External Outputs
1
Setting to control any external
devices that may be connected
to your Camera Server.
If Setup... is clicked, click the drop-
3
down menu for the target external
device and set External Outputs to On
or Not Specified on the External
Outputs Setting dialog.
6
83