Cooling; Degrees Of Protection; Ambient Conditions - ABB ACS800 Hardware Manual

Cooling

Method
Filter material
Free space around the unit
Cooling air flow

Degrees of Protection

Ambient Conditions

Installation site altitude
Air temperature
Relative humidity
Contamination levels
(IEC 60721-3-3, IEC 60721-
3-2, IEC 60721-3-1)
Atmospheric pressure
Vibration (IEC 60068-2)
Shock (IEC 60068-2-29)
Free fall
Internal fan, flow direction from front to top
UL Type 12
Note: When installing the filter media, the white side must face the outside of the cabinet
and the colored side must face the inside of the cabinet
See "Free Space Around the Unit".
See "NEMA Ratings".
UL type 1, UL type 1 Filtered, UL type 12
Environmental limits for the drive are given below. The drive is to be used in a heated,
indoor, controlled environment.
Operation
installed for stationary use
0 to 4000 m (13123 ft)
above sea level [above
1000 m (3281 ft), see
section "Derating"]
-15 to +50 °C (5 to 122 °F).
See section "Derating".
5 to 95%
No condensation allowed. Maximum allowed relative humidity is 60% in the presence of
corrosive gases.
No conductive dust allowed.
Boards without coating: 
Chemical gases: Class 3C1
Solid particles: Class 3S2
Boards with coating: 
Chemical gases: Class 3C2
Solid particles: Class 3S2
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2 2
max. 7 m/s (23 ft/s )
(13.2 to 100 Hz) sinusoidal
Not allowed
Not allowed
Inlet (door)
3AUA0000006723 (qty 1)
Storage
in the protective package
-
-40 to +70 °C (-40 to
+158 °F)
Max. 95%
Boards without coating: 
Chemical gases: Class 1C2
Solid particles: Class 1S3
Boards with coating: 
Chemical gases: Class 1C2
Solid particles: Class 1S3
70 to 106 kPa
0.7 to 1.05 atmospheres
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
2 2
max. 7 m/s (23 ft/s )
(13.2 to 100 Hz) sinusoidal
2 2
Max. 100 m/s (330 ft./s ),
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
Outlet (roof)
3AUA0000006722 (qty 2)
Transportation
in the protective package
-
-40 to +70 °C (-40 to
+158 °F)
Max. 95%
Boards without coating: 
Chemical gases: Class 2C2
Solid particles: Class 2S2
Boards with coating: 
Chemical gases: Class 2C2
Solid particles: Class 2S2
60 to 106 kPa
0.6 to 1.05 atmospheres
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz), 
2 2
max. 15 m/s (49 ft/s )
(9 to 200 Hz) sinusoidal
2 2
Max. 100 m/s (330 ft./s ),
11 ms
100 mm (4 in.) for weight
over 100 kg (220 lb)
Technical Data
89