Free-Standing - Huawei TE30 Quick Start Manual

Quick Start Guide

Free-Standing

Place the TE30 on a flat surface.
If you have to place the TE30 on an inclined surface, ensure that the inclination is less than 15°
so that the TE30 can function properly.
Inverted Installation
Purchase a bracket for inverted installation and mount the TE30 onto the ceiling using the
bracket.
The bracket must meet the following requirements:

It is able to bear a weight of at least 10.5 kg (23.15 lb) and has a thickness between 2 mm
(0.08 in.) to 3 mm (0.12 in.).

It comes with a location pillar, which can be inserted into the location hole of the TE30.
The distance between the screw hole on the bracket and location pillar must be 14.5 mm
(0.57 in.), which is also the distance between the two holes on the bottom of the TE30.

It comes with a screw hole and one or more 1/4"-20UNC screws.

When attaching the purchased bracket and TE30, it is recommended that you use a 1/4"-
20UNC screw delivered with the purchased bracket rather than a 1/4"-20UNC screw
delivered with the TE30 because the length of the latter may be too long or too short to
hold up the purchased bracket.

In this installation mode, the mesh enclosures of the microphones must be rotated 30
degrees in the directions shown in the following figure until they are tightened. Do not
rotate the mesh enclosures in other installation modes; otherwise, sound pickup may be
affecte.
6 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
HUAWEI TE30 Videoconferencing Endpoint
Issue 09 (2014-01-21)