Setting Connection Parameters - Huawei 9000 User Manual

HUAWEI 9000 HD Video Terminal Touch Panel
User Guide
l
l
l
l

2.4 Setting Connection Parameters

Before logging in to the touch panel for the first time, set the connection parameters.
Prerequisites
The wireless network is enabled. To enable the wireless network:
1.
2.
Procedure
Step 1 Tap Apps on the touch panel and then from the application screen, tap
Step 2 From the displayed dialog box, tap Settings to display the connection screen.
Step 3 Set the parameters described in
Table 2-1 Connection parameters
Parameter
IP address
Issue 01 (2012-04-30)
Tap: Use your finger to touch an item on the touch panel, and remove your finger quickly
from the screen.
Tap and hold: Use your finger to touch an item on the touch panel, and continue to touch
the item for at least 2 seconds.
Slide: Touch and hold somewhere on the screen, and move your finger leftward and
rightward to toggle between the zones displayed in the center, or upwards and downwards
to view the full content of a menu.
Drag: Tap and hold an item on the touch panel, and drag the item to a desired position.
Tap Apps on the touch panel to display the application screen. Choose Settings > Wireless
& networksand tap WLAN to allow the touch panel to automatically search for wireless
networks.
Tap WLAN Settings to display the WLAN networs screen. Under WLAN networks, tap
the available wireless network dedicated to Huawei videoconferencing.
Description
Specifies the IP address of the terminal.
NOTE
To obtain the terminal's IP address, perform either of the following:
l From the web interface, choose System Settings > Network > IP and check the
value of Local IP address.
l From the user interface controlled by the remote control, check the lower left corner
of the home screen. Alternatively, choose Settings > Network > IP and check the
value of Local IP address.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Table 2-1 to connect to the terminal.
2 Using the Touch Panel
.
3