Table of Contents
Advertisement
HUAWEI 9000 HD Video Terminal Touch Panel
User Guide
Table 2-3 Security parameters
Parameter
Current password
New password
Confirm password
Step 4 Tap Save.
----End
Follow-up Procedure
If you forget the security password, restore the telepresence system's security password, IP
address and protocol to their default settings. To do so, perform the following: Tap
task bar, choose Settings > Restore Defaults, and tap OK when prompted. The system is then
restored to its default settings, with Protocol (a connection parameter) set to HTTPS and no
security password or IP address set.
2.8 Waking Up the Touch Panel
Wake the touch panel from sleep to perform conference operations.
The touch panel goes to sleep if either of the following occurs:
l
l
To wake up the touch panel from sleep, tap the screen and follow the onscreen instructions.
2.9 Using the Online Help
While using the touch panel, access the online help or call the administrator to immediately
obtain the instructions you need to complete tasks.
Tap
l
Issue 01 (2012-04-30)
The terminal hibernates.
You do not operate the touch panel for a specified period of time when the local site is not
in a conference and the terminal has no presentation source plugged in.
NOTE
When the touch panel enters power saving mode, the screen turns off. To turn on the screen, press the touch
panel's Power key for 1 second.
in the task bar and tap either of the following:
to display the Help screen and view help information.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
In this field, enter the current password. By default, no
password is set.
Enter a new password. This new password is required
to access Advanced Settings. If the new password is
left blank, no password is required for accessing
Advanced Settings.
2 Using the Touch Panel
in the
7
Advertisement
Table of Contents
