Switching Between Screen Layouts - Huawei 9000 User Manual

HUAWEI 9000 HD Video Terminal Touch Panel
User Guide
Procedure
Step 1 Tap
Step 2 With the camera in the desired position, tap and hold an unused number for about 3 seconds to
save the preset.
----End
Follow-up Procedure
On the Control Camera screen, tap a preset number to apply that preset to the camera.

4.4 Switching Between Screen Layouts

Available screen layouts are full screen, Picture in Picture (PiP), two panes, and three panes.
Table 4-2
Table 4-2 Screen layouts switching buttons
Butto
n
The available screen layouts depend on whether you are in a conference:
l
l
Issue 01 (2012-04-30)
in the task bar to display the main menu and tap Control Camera.
NOTE
If you select a number to save a camera preset to and another camera preset is already saved to that number,
the new camera preset replaces the original one.
describes the buttons to switch between screen layouts.
Description
Switches the screen layout to
/
full screen.
/
The video feed displayed in
full screen can be
presentation, remote video,
and local video.
Switches the screen layout to
two panes.
NOTE
The three-pane mode is available during conferences only when there is a presentation being shared.
If you are not in a conference and a presentation source is plugged in, tap buttons in the
screen layout control area (shown in
video and presentation in full screen, two panes, or three panes.
If you are in a conference, tap buttons in the screen layout control area to display the local
and remote video in full screen, two panes, or three panes. If a presentation is being shared,
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Butto Description
n
Switches the screen layout to PiP.
Switches the screen layout to three panes.
Figure 4-1) on the home screen to display the local
4 Controlling What You See
23