Installation Procedure; Installing Hipath 3750 - Siemens HiPath 5000 Service Manual

inst_h3.fm
Installing HiPath 3000
Installing HiPath 3750, HiPath 3700
4.3.2

Installation Procedure

Table 4-10 HiPath 3750, HiPath 3700 - System Installation Procedure
Step

Installing HiPath 3750

1. Selecting the Installation Site, page 4-89
(usually predetermined)
2. Unpacking the Components, page 4-91 Unpacking the Components, page 4-130
3. Install MDFU or MDFU-E (not for USA),
4. Setting up the System Cabinets (from
Single Cabinet
Two cabinets (stacked)
Two cabinets (side by side)
Three cabinets (stacked)
5. Grounding the System, page 4-108
Checking the Grounding, page 4-113
6. Connecting the Cable to the Backplane,
7. Laying the Line Network and Setting
Jumpers on the MDFU or MDFU-E, page
8. Loading the System Software and Installing Subboards on the CBCPR, page 4-153
9. Configuration notes, page 4-154 (cabinet(s) are already equipped with the boards)
10.
4-86
Installation Activity
page 4-92
Page 4-93):
page 4-114
4-124
Connecting Workpoint Clients, page 4-163
HiPath 3000 V6.0, HiPath 5000 V6.0, Provisional Service Manual
Installing HiPath 3700 (19-Inch Cabi-
net)
Selecting the Installation Site, page 4-130
(generally determined by the existing 19-
inch cabinet)
Mounting the System Cabinet in the 19-
Inch Cabinet, page 4-131
Mounting the Patch Panel in the 19-Inch
Cabinet, page 4-135
Grounding the System, page 4-136
Checking the Grounding, page 4-138
Connecting the Cable to the Backplane,
page 4-139
Connecting the Line Network to the Patch
Panel, page 4-152
P31003-H3560-S403-54-7620, 09/05