Mitsubishi Electric apricot ft series Owner's Handbook Manual page 42

5 MOTHERBOARD FEATURES
AND UPGRADES
This chapter describes the features of the computer motherboard
and gives step-by-step instructions for adding more system or video
memory, upgrading the processor, and replacing the configuration
battery. Details of all relevant motherboard connectors and jumper
settings are included.
The Welcome chapter tells you how to remove the system unit
panels. See the section on "Anti-static precautions" in the Safety &
Regulatory Notices at the beginning of this manual for advice on how
to avoid damaging your computer with static electricity.
WARNING
Never carry out any work inside the computer with AC power applied.
Always shut down the computer and unplug all power cords before
removing the top cover.
CAUTION
Do not alter any jumpers or switch settings other than those identified
here, unless told to by your Mitsubishi Electric PC supplier or an
authorised maintainer. Otherwise, you may damage the system
processor, the motherboard, or both.
NOTE
After you have upgraded the computer, it may not at first recognise the
new configuration. Start the BIOS Setup utility, go to the Advanced
menu and change the Reset Configuration Data item to "Yes", then
restart the computer.
OWNER'S HANDBOOK 5/1