Shutting Down The Pc - Mitsubishi Electric apricot ft series Owner's Handbook Manual

G e t t i n g S t a r t e d

Shutting down the PC

2/4 OWNER'S HANDBOOK
To shut down the computer safely, do the following:
1. Wait until all the activity indicators on the front bezel show
'not busy'.
2. Turn off any attached peripherals, except for the monitor and
other peripherals that are designed to be kept on permanently.
3. According to your operating system:
◊ In Windows 95 or Windows NT 5.x, click the Start
button in the taskbar, then click Shut Down. Select
Shutdown the computer and click Yes. You do not have to
press the P
◊ In Windows NT 4.x, click the Start button in the taskbar,
then click Shut Down. Select Shutdown the computer and
click Yes. When told that it is safe to do so, press the
button to turn off the computer.
P
OWER
◊ In Windows for Workgroups, click the File menu in
Program Manager, then click Exit Windows. Once back in
MS-DOS, press the P
◊ In MS-DOS, or during POST, press the P
After you shut down the PC, wait at least 5 seconds before turning
it on again. The computer may not initialise itself properly if you
turn it off then on again in quick succession.
Emergency shut down
In exceptional circumstances, you can put your PC into Off [red]
mode without shutting down Windows first. To do this, press and
hold down the P
OWER
If you press the P
or performing the power-on self-test (POST), the PC always goes
directly into Off [red] mode.
CAUTION
In an emergency shut down, you may lose any recent changes made to
the files you are currently working on.
button.
OWER
OWER
button for at least four seconds.
button while the PC is running MS-DOS
OWER
button.
OWER
button.