Table of Contents
Advertisement
13. Rotate the top hinge 180°.
Unscrew the hinge pin and re-tighten it
to the opposite side. (12)
14. Fit the top hinge on the left hand
side bushing of the door. (13)
15. Locate and re-fit door to bottom
hinge pin. (14)
16. Re-fit the upper hinge on the
opposite side by using a flat headed
screwdriver. (15)
17. Fit front top panel plastic hinge
covers on the opposite sides. (16)
18. Adjust the two front feet if
necessary.
19. Check that door opens and
closes easily, it is aligned correctly and
there are no gaps allowing air into the
cabinet. If there are gaps between the
door seal and the cabinet, adjust the
door seal by gently pulling away from
the door using fingers.
20. Check that all the hinge screws
are tightened. Avoid over tightening
the screws.
21. Put all items, fittings back in the
appliance.
22. Wait for at least 4 hours to allow
the system to settle before switching
on.
23. Once the correct storage
temperatures have been reached in
the appliance, put back all the food.
11
EN
Advertisement
Table of Contents
