Siemens SINAMICS S120 Manual page 53

Assembling
1. Attach the row clamps/row connectors to the appropriate profiles (as shown in the figures
2. Insert and tighten the screws and washers.
3. If necessary, reattach the protective covers and doors.
Note
Installing the top cover or the hood to increase the degree of protection
It makes sense to only increase the degree of protection after installation work has been
completed, as in some cases, it is easier to access individual elements from the top, with the
top cover removed or with the hood removed than from the front.
NOTICE
Installing the side panels
For each row of cabinets installed, one side panel must be installed on the right (option
M26) and one side panel on the left (option M27).
Cabinet Modules
Manual, (GH5), 05/2010, A5E03263538A
above).
Mechanical installation
3.3 Installation
53