Program 92 : Copy Program; Copy Program - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Program
Use Program 92-01 : Copy Program to copy the data for one program to another multiline terminal,
92 port, group, or other number. Refer to the following charts to see which programs can be copied.
Input Data
Item No.
01
The Copy Program is applicable only for the following programs :
Trunk Port Base
Program No.
14-01
14-02
14-04
14-08
14-09
20-30
21-03
21-12
21-21
21-22
2-626
Program Number
Item
Source Number • For Trunk Base : Trunk Port Number
• For Trunk Group Base : Trunk Group
Destination Number (From)
• For Extension Base : Extension Num-
Destination Number (To)
• For Department Group Base : De-
• For DSS : DSS Console Number 01
• For Door Phone: Door phone num-
Trunk Basic Data Setup
Copy all data except Trunk Name (Item 01).
Analog Trunk Data Setup
Behind PBX Setup
Music on Hold Source for Trunks
Conversation Recording Destination for Trunk
Timer Class for Trunk
Trunk Group Routing for Trunks
ISDN Calling Party Number Setup for Trunk
Toll Restriction for Trunks
CO Message Waiting Indication

Program 92 : Copy Program

92-01 : Copy Program

Input Data
001 ~ 126 (SL1000) 001 ~ 096
(SL1100)
Number 01 ~ 25
ber Maximum four digits (SL1000)
Maximum eight digits (SL1100)
partment Group Number 01 ~ 32
~ 12
ber : 1 ~ 8 (SL1000) 1 ~ 6 (SL1100)
Program Name
ISSUE 3.01
XX ~ XX
Description
Enter the extension, trunk, group
or other number from which the
data is to be copied.
Enter the first extension, trunk,
group or other number to which
the information is to be copied.
Enter the last extension, trunk,
group or other number to which
the information is to be copied. If
the information is being copied
only to one extension, trunk,
group or other number, enter the
information entered in the Desti-
nation Number (From) entry.
Program 92 : Copy Program