Trunk Incoming Ring Tone Of Extension Setup - NEC SL 1000 Programming Manual

ISSUE 3.01
Program 15 : Extension, Basic Setup

15-28 : Trunk Incoming Ring Tone of Extension Setup

Level:
IN
(This Program is available for V1.5 or higher)
Description
Use Program 15-28 : Trunk Incoming Ring Tone of Extension Setup to define the ringing tone for
each trunk port of extension.
Input Data
Extension Number
Trunk port number
Day/Night Mode
Item Item
No.
01 Trunk Incoming
Ring Tone
Programming Manual
Input Data
0 = Trunk incoming ring Assign individual ring tones at ex-
tone (SL1000) tension for each trunk and each
1 = Tone pattern1 Night mode.
(SL1000) When 0 (Trunk incoming ring tone)
2 = Incoming external is selected, it follows the setting of
ring tone (SL1000) Program 15-02-02.
3 = Tone pattern 3 When 2 (Incoming external ring
(SL1000) tone) is selected, it follows the set-
4 = Tone pattern 4 ting of Program 22-03. (SL1000)
(SL1000)
5 = Tone pattern 5
(SL1000)
6 = Tone pattern 6
(SL1000)
7 = Tone pattern 7
(SL1000)
8 = Tone pattern 2
(SL1000)
0 = Trunk incoming ring
tone (SL1100)
1 = High (SL1100)
2 = Middle (SL1100)
3 = Low (SL1100)
4 = Melody 1 (SL1100)
5 = Melody 2 (SL1100)
6 = Melody 3 (SL1100)
7 = Melody 4 (SL1100)
8 = Melody 5 (SL1100)
Up to four digits (SL1000)
Up to eight digits (SL1100)
001 ~ 126 (SL1000)
001 ~ 096 (SL1100)
1 ~ 8
Description
SL1000/SL1100
Default Related
Program
0 22-03
15-02-02
2-167
Program
15