Firmware Update Time Setting - NEC SL 1000 Programming Manual

SL1000/SL1100
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Program
Use Program 90-36 : Firmware Update Time Setting to define the data for the firmware update
90 feature. This data is available to set from the PC Programming FW update feature.
The following firmware is available to update with this feature:
• main.bin
• Dspdbu.bin
• dsp.bin
• intradbu.bin is not supported
Input Data
Item
No.
01 Firmware Update Sched-
ule Time
02 Update mode
03 Update Report
Sample Report
Result
Update Success
Update Fail
Update Fail
Update Fail
2-600
Program 90 : Maintenance Program

90-36 : Firmware Update Time Setting

Item Input Data
Read Only:
Year : 0 ~ 99
Month : 0 ~ 12
Day : 00 ~ 31
Hour : 00 ~ 23
Minute : 00 ~ 59
Read Only:
0 = Non Active
1 = Activated
Read Only:
Maximum 256 charac-
ters
Update Success
Update is fail. Since 'A' drive is not available.
Update is fail. Since main up is not exist on A drive.
Update is fail. Since Time is expired.
Default Description
0 Set the time to update the firmware us-
ing a compact flash card.
Time registration fails if an expired
time is registered.
0 Activate the Firmware Update feature.
If this setting is 1, new firmware on the
compact flash card updates according
to the setting at 90-36-01.
- Output a report when the update is
executed and saves one copy on the
system. If a new update occurs, the
new report overwrites the old report.
Refer to the Sample Report on
page 2-600 shown.
Report Display
Program 90 : Maintenance Program
ISSUE 3.01