Configuration Overview
SNMP Management Information Base
SNMP commands are transported via Ethernet. The router supports FA MIB 2.2
and the Enterprise MIB (Management Information Base.)
For more information, see
Common Configuration Settings
To provide connectivity between hosts and devices, the router must establish an
address on each connected Fibre Channel network and SCSI bus. The following
paragraphs discuss configuration settings that are commonly modified and are
available in the Visual Manager UI and the Serial/Telnet UI. For procedural
information on accessing and changing these settings, see
Manager User Interface," and
Controller LUN Commands
The router supports a set of SCSI-3 commands that can be received as FCP
commands over the Fibre Channel bus. These commands provide support for
value added features such as Extended Copy. When using these commands, they
must be sent to the Controller LUN. For more information, see
"Controller LUN Commands."
36
Appendix
D, "SNMP Management Information Bases."
Chapter
5, " Serial/Telnet User Interface."
Network Storage Router M2402 User Guide
Chapter
4, "Visual
Appendix
B,