Figure 88
Channel map.
Figure 88: Creating a Map Entry for a Fibre Channel map
Note:
entered. The Target ID must already be defined in the SCSI configuration.
Creating an Entry for a SCSI Map
To pre-enter a map entry for devices that are not yet online, select Create (C).
Note:
A series of questions is displayed. The questions will vary based on the 'Current'
map protocol. Required information includes the Target ID and LUN address,
protocol, port, device name, and device type must be entered.
Figure 89
map.
Network Storage Router M2402 User Guide
is an example of the screen display when creating an entry for a Fibre
If the device being added is a SCSI device, the Target ID and LUN ID must be
All essential information about the device must be known.
is an example of the screen display when creating an entry for a SCSI
Serial/Telnet User Interface
141