Removing a Power Module or Power Bay Cover
To remove a power module or power bay cover:
1. Loosen the thumbscrews 1 in a counter-clockwise rotation on the power
Figure 122: Thumbscrews and handle of a power module
Network Storage Router M2402 User Guide
Caution:
The router detects error and warning conditions by comparing the
number of power modules detected to the number of power modules in the
configuration information. If a power module is added or removed, the power
supply configuration must be updated to ensure the proper warning and error
conditions will be detected.
Caution:
To prevent static shock, which can damage electrical equipment, use
industry accepted handling practices when servicing the router and its
components. See Appendix F, "Electrostatic Discharge," for more information.
module or the power bay cover as shown in
The thumbscrews cannot be physically detached from the modules, but can be
loosened so that the power module or power bay cover can be removed, as
described in Step 2.
Hardware Module Replacement
Figure 122
and
Figure
1
2
123.
185