Ordering Information For Options And Accessories - Siemens sinamics dcp Operating Instructions Manual

Preparations for use

4.3 Ordering information for options and accessories

4.3 Ordering information for options and accessories
Ordering information for options with order codes
Table 4- 1 Control Unit CUD options
Option
Terminal Module Cabinet (TMC) can be snapped onto a 35 mm mounting rail. Enables the
simple connection of the CUD standard signals (X177) via spring-loaded terminals in an easi-
ly accessible area of the control cabinet. The CUD is equipped with an adapter board. Termi-
nal Module Cabinet and connecting cable (3 m) are supplied as separate items.
Note:
In the device version with option G63, the X177 terminal connections are no longer available
directly on the CUD.
CBE20 PROFINET
Memory card
Table 4- 2 Further options
Option
Coated modules
Coated modules increase the robustness against climate influences:
Relative/absolute humidity 5% to 95% / 1 to 29 g/m3 for ambient or coolant temperature ≤
•
30° C.
≤ 60% when SO2 and H2S is present and/or for ambient or coolant temperature 30° C to
•
40° C.
Oil mist, salt mist, ice formation, condensation, dripping water, spraying water, splashing
•
water and water jets are not permitted.
Extension of the warranty conditions by 12 months to a total of 24 months
(2 years) after being delivered
Extension of the warranty conditions by 18 months to a total of 30 months
(2½ years) after being delivered
Extension of the warranty conditions by 24 months to a total of 36 months
(3 years) after being delivered
Extension of the warranty conditions by 30 months to a total of 42 months
(3½ years) after being delivered
Extension of the warranty conditions by 36 months to a total of 48 months
(4 years) after being delivered
Extension of the warranty conditions by 48 months to a total of 60 months
(5 years) after being delivered
Power connections from below
Can be ordered as an option for 30 kW devices, included in the standard scope of delivery for 120 kW devices.
1)
Can only be ordered for the 120 kW device.
2)
28
Order codes
G63
G33
S03
Order codes
M08
*1)
Q80
Q81
Q82
Q83
Q84
Q85
M79
2)
Operating Instructions, 05/2016, A5E34382853K
SINAMICS DCP