Names And Functions Of Part - Sanyo MLS-3751 Instruction Manual

Names and Functions of Parts
Safety valve pressure relief port
Steam is discharged through
this port if pressure in the
chamber rises abnormally.
Control panel
Movable handle
Used for unlocking the cover.
The cover can be unlocked by
pressing this handle down and
pulling toward you.
Handle
Use for opening/closing the
cover.
Pressure gauge
Indicates the pressure inside
the chamber.
Exhaust tank
Condenses steam emitted
from the chamber.
Tank case
Encases the exhaust tank.
Exhaust hose
Sends steam and air in the
chamber to the exhaust tank.
Packings
Hose in tank
Converts steam discharged
from the chamber into water.
9
Rear side
Exhaust tank
on the rear side
Tank mounting
bracket
Cover
Cover to shut the chamber tight.
It is lined with silicon rubber
packing.
Grip
Power switch
Cover
Remove this cover to connect the
optional printer to the product.
Caster
Exhaust valve
Manually opening/closing valve
used for draining heating water
from the chamber.
Drain outlet
Heating water is drained from the
chamber through this outlet.
Connect the included drain hose
to drain heating water.