Panasonic KX-TDA50 Programming Manual page 608

2.16 [10] CO & Incoming Call
Programming Manual References
None
Feature Manual References
1.9.10 INCOMING CALL FEATURES
1.13.12 PRIVATE NETWORK FEATURES
Distribution Method (KX-TDA100/KX-TDA200/KX-TDA600 only)
Selects the distribution method for incoming CO line calls. The value range of this setting depends
on the card type and Trunk Property assigned for each CO line.
Default
DIL
Value Range
DIL: Distribution depends on the CO line through which the calls arrive
DID: Distribution depends on the DID number of the calls
Maintenance Console Location
2.16.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Manual References
1.4.5 DID (Direct Inward Dialing)
1.9.10 INCOMING CALL FEATURES
DID/TIE—Remove Digit
Specifies the number of leading digits to be removed from the incoming called number for DID
distribution (KX-TDA100/KX-TDA200/KX-TDA600) or for TIE line service.
With the KX-TDA50, this parameter is shown as TIE—Remove Digit.
Default
0
Value Range
0–15
Maintenance Console Location
2.16.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
608 PC Programming Manual