Panasonic KX-TDA50 Programming Manual page 537

DISA Intercept—Intercept when Destination through DISA is Busy
Selects how DISA calls are handled if the destination is busy, and disables Call Waiting, FWD, or Idle
Extension Hunting.
Default
Busy Tone
Value Range
Busy Tone, Enable, Busy Message
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
DISA Intercept—Intercept when Destination through DISA sets DND
Selects how DISA calls are handled if the destination sets DND, and disables Idle Extension Hunting.
Default
Busy Tone
Value Range
Busy Tone, Enable, Busy Message
Maintenance Console Location
2.11.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—DISA to Public CO
Specifies whether the DISA port of the message card is released when a CO-to-CO line call using
DISA is established. To enable this setting, "CO-CO with DISA—Fwd/Transfer to Public CO" on this
screen should be set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end
of a call and disconnect the CO line quickly.
Default
Enable
2.11 [5] Optional Device
PC Programming Manual 537