Display Options; Extension Number Setting - Panasonic KX-TDA50 Programming Manual

2.1 Introduction
For details about how to change the status of a card, see To change the status (INS/OUS) of a card
(Interactive mode only) on screen 2.7.1 [1-1] Slot.
2.1.5

Display Options

The View and Window menus provide options to control the display of items within the Maintenance
Console.
• View
– Toolbar: Displays or hides the tool bar of commonly used buttons.
– Statusbar: Displays or hides the bar at the bottom of the Maintenance Console window.
– System Menu: Displays or hides the menu of PBX setting screens.
• Window
– Cascade: When multiple data screens are open, displays all open screens overlapped, with
the title bars visible.
– Tile(Horz): When multiple data screens are open, displays all open screens side by side.
– Tile(Vert): When multiple data screens are open, displays all open screens vertically.
2.1.6

Extension Number Setting

Many screens within the Maintenance Console software allow you to select extensions as part of
programming various features (for example, as members of a group). These screens use a standard
window to make selecting multiple extensions easy, accessed by clicking a button. This section
explains how to use this Extension Number Setting window.
To select multiple extension numbers, select the type of extension to display, highlight the extensions
you wish to add, then click the Add button. When finished, click OK. Data for the selected extensions
will be added to the first free spaces on the original screen.
Extension Type
Selects the types of extension numbers to display in Extension Numbers & Names List. Multiple
items can be selected. Items that are not available are shown with a grey checkbox.
Default
None selected.
Value Range
Wired Extension, Portable Station, VM Group(DPT), VM Group(DTMF), ICD Group, PS Ring Group,
OGM(DISA), External Pager, Analog MODEM
Extension Numbers & Names List
Displays all available extensions of the types selected in Extension Type, and names. Click entries
to select them, and click the Add button when finished, to add the selected extensions. To deselect
an entry, click it again.
Default
Available extensions.
28 PC Programming Manual