Panasonic KX-TDA50 Programming Manual page 333

Voice (RTP) UDP Port No. (Server)
Specifies the UDP port used by the IP-EXT card to transmit and receive RTP (Realtime Transfer
Protocol) data. This must be changed if another network application is using the same port.
For voice communications, an IP-EXT card uses 64 contiguous UDP ports, starting from the port
number specified here.
Default
8000
Value Range
1024–65472
Maintenance Console Location
2.8.20 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
Voice (RTP) UDP Port No. (IP-PT)
Specifies the UDP port used to transmit and receive RTP (Realtime Transfer Protocol) data on the IP-
PT side. This must be changed if another network application is using the same port.
For voice communications, an IP-PT uses 64 contiguous UDP ports, starting from the port number
specified here.
Default
8000
Value Range
1024–65472
Maintenance Console Location
2.8.20 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.9.15 IP-PT (IP Proprietary Telephone)
2.8 [2] System
PC Programming Manual 333