Replacing The Oven Lightbulb - Siemens HB86K58.B Instruction Manual

Malfunction
A 5" is shown in the clock
display.
The clock display contains the
error message E1" or E2".
The clock display contains the
error message E9", E10", or
E11".
The clock display contains the
error message E16" or E17".
Microwave operation is
cancelled for no obvious reason.
Replacing the oven
lightbulb
Possible cause
The food was colder than
usual.
The safety switch off was
activated. The oven was
operated for a long period
without the setting being
changed.
The temperature sensor has
failed.
The microwave has a
malfunction.
Technical fault.
The microwave has a fault.
Repairs may only be carried out by fully trained
after sales service engineers. Incorrect repairs may
result in serious injury to the user.
The oven lightbulb can be replaced. Heat resistant
12 V 20 W halogen bulbs are available from the
after sales service or in specialized stores.
When removing a new halogen bulb from the
packaging, always use a dry cloth. This will increase
the life of the bulb.
Notes/remedial action
Stir or turn the food during
cooking.
Press the Stop button.
Call after sales service.
It is possible to use the microwave
function alone.
Press the Stop button. The fault
message goes out. Start
microwave operation again. If the
fault message appears again,
please call the after sales service.
It is possible to operate the oven
without the microwave.
Contact the after sales service.
If this fault occurs repeatedly,
please call the after sales service.
It is possible to operate the oven
without the microwave.
57