Configuring The Process View - ABB SM1000 User Manual

...4 CONFIGURATION

4.5.4 Configuring the Process View

Note. This view is displayed only if the Totalizer option is fitted.
Totalizer Tag Name
Totalizer Value
Recording Chart Bar
Process view enable
Totalizer view select
Menu enables
Process view enables
1. Message select enable
2. Alarm acknowledge enable
3. Totalizer reset enable
4. Totalizer stop/go enable
5. View select enable
44
Alarms View – Totalizer Enabled
Total Daily In Flow
0005402801
litres
Statistics View – Totalizer Enabled
Total Daily In Flow
0005402801
litres
Values since last Totalizer Reset or Totalizer wrap.
Updated only if the Totalizer is Enabled and Running.
Alarms View or Statistics View – Totalizer not Enabled
Alarms View – Alarms A and B not Enabled
Total Daily In Flow
0005402801
litres
Process
Digital Archive
On
Statistics
1 2 3 X X
OK
Low In Flow Rate
40
High In Flow Rate 280
Alarm
Alarm Trip
Tag
Level
Channel Long Tag Name
Storage Tank 1 In Flow
225.4 110.9 201.0
Max Min Average
Low In Flow Rate
40
High In Flow Rate 280
Storage Tank 1 In Flow
Set to 'On' to allow the operator to display the Process View.
Select the Totalizer View to be displayed – Alarms or
Statistics. This setting can be changed by the Operator if
'View select enable' is ticked below.
Select the menu items to be accessible from the Process
View.
Message select enable
Allows the Operator to activate one of six pre-configured
messages.
Alarm acknowledge enable
allows the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Allows the Operator to reset the totalizers on any or all
channels.
Totalizer stop/go enable
Allows the Operator to stop and start totalizers on any or all
channels.
View select enable
Allows the Operator to select the Alarms and Statistics views.
Note. Menu items that are not enabled appear greyed-
out on the Process View menu.
In Flow
Alarm Acknowledged
204.9
l/hr
In Flow
204.9
l/hr
In Flow
204.9
l/hr
In Flow
204.9
l/hr