ABB SM1000 User Manual page 19

Videographic recorder

Hide thumbs Also See for SM1000:

Table of Contents

...2.7 Alarm Event Log

Configuration

Setup

Filter

Group 1 Alarms

Group 2 Alarms

Operator Messages

Active Transitions Only

Alarm Acknowledge

Group 1 Alarms

Group 2 Alarms

Ch 1.1 Level

Ch 1.2 Pressure

Ch 1.3 In Flow

Ch 1.4 Out Flow

Ch 1.5 Temp

Ch 1.6 Alarm 1

All

Select the Configuration level – see Section 4.

Select the Setup level – see Section 3.

Select the entries displayed in the log. 4 Indicates categories currently displayed.

Note. Hiding and displaying log entries does not affect the recording of events in the

log.

Note. All selected alarm event transitions (from inactive to active, from active to

acknowledged, from acknowledged to inactive, from active to inactive) appear in the

sequence in which they occurred.

Note. Selecting 'Active Transitions Only' displays entries for alarms when made

active and hides all acknowledged & inactive transistions.

Used to acknowledge active alarms in each of the process groups, either individuallly or

globally.

Note. If neither alarm on a particular channel is configured, the short channel tag is

greyed-out in the menu.

2 OPERATION...

Table of Contents