ABB SM1000 User Manual page 36

...4 CONFIGURATION
...4.3 Making Changes to Parameters – Figs. 4.5 to 4.7
Tick Box
1. Totalizer reset enable
2. Totalizer stop/go enable
3. Message select enable
4. Alarm acknowledge enable
Note. Items not selected are
indicated by an X in the parameter
window
1 2 X 4
Parameter Limits
Numeric (0.0...1000.0)
999.9
Note. Values outside the given
range or with too many decimal places
are highlighted
123.45
Note. Tags with a high percentage of capital letters and wide characters such as 'W' or 'M' may appear truncated in
some Operator Views. In such cases, use lower case letters or fewer characters.
34
Use and
item and key to toggle
selected item on or off.
OK
Highlight text box and use
keys to insert text at different position.
Use these keys
to navigate and
to select highlighted
item.
Fig. 4.6 Data Entry Dialog Boxes
List Box
Off
keys to select
millivolts
milliamps
Volts
Resistance
Resistance thermometer
Thermocouple
and
Flashing Cursor
Spacebar