ABB SM1000 User Manual page 37

...4.3 Making Changes to Parameters – Figs. 4.5 to 4.7
Common
Group 1
Channels 1.1 - 1.6
Group 2
Channels 2.1 - 2.6
Functions
I/O Modules
Exit
<configuration filename>.cfg
Save as Current Configuration
Save Configuration
Cancel
Note.
• The current, active, configuration is saved on internal storage with the filename 'SM1000.cfg'.
• Selecting 'Save as Current Configuration' causes recording to be suspended for a short time while the new configuration
is implemented.
• When saving the current configuration to internal storage, the file is saved automatically with the 'SM1000.cfg' filename,
and with a <time><date><instrument tag>.cfg filename.
• When saving the current configuration to external storage, the file is saved automatically to internal storage with the
'SM1000.cfg' filename, as well as to the external archive media as <time><date><instrument tag>.cfg.
• When 'Save Configuration' is selected the configuration file is stored as <time><date><instrument tag>.cfg on internal or
external storage.
• Changes are saved to non-volatile memory only when one of the save options above has been selected. Any powerdown
before this results in lost configuration changes.
• Selecting 'Cancel' causes unsaved changes to be discarded and returns the instrument to the Operating Level.
Caution.
New internal data files for enabled recording channels are created if any of the following configuration parameters have been
changed: Recording channel source; Primary sample rate; Secondary sample rate; Primary/secondary sample rate source;
Input filter type; Engineering range; Channel tag. Any unarchived data is lost.
<configuration filename>.cfg
Internal Storage
External Storage
Fig. 4.7 Exiting Configuration Mode
4 CONFIGURATION...
28/03/00
Process Group 1
14:52:00
Level Pressure In Flow Out Flow Temp Alarm 1
2.08 4 204.9 198.9 195 On
metres bar l/hr l/hr °C
0 10
High Out Flow Rate
12:00:00
11:59:00
11:58:00
High Level
11:57:00
35