ABB SM1000 User Manual page 13

...2.4 Bargraph Views (Horizontal and Vertical)
Configuration
Setup
Operator Messages
Message 1
Duty/Stby Switched
Message 3
Message 6
Max/Min Reset
Ch 1.1 Level
Ch 1.2 Pressure
Ch 1.3 In Flow
Ch 1.4 Out Flow
Ch 1.5 Temp
Ch 1.6 Alarm 1
All
Alarm Acknowledge
Ch 1.1 Level
Ch 1.2 Pressure
Ch 1.3 In Flow
Ch 1.4 Out Flow
Ch 1.5 Temp
Ch 1.6 Alarm 1
All
Select the Configuration level – See Section 4.
Select the Setup level – see Section 3.
Add one of six preset messages to the alarm event log. The selected operator message is
displayed on-screen briefly.
Reset the Maximum and Minimum value markers on one or all channels to the current
value.
Note. These Maximum and Minimum values are for display purposes only. They are
not saved or archived and are not connected to the Totalizer Maximum and Minimum
Values displayed in the Process View.
Note. These Maximum and Minimum values are reset whenever the current
configuration has been changed or is re-saved.
Acknowledge active alarms in the current process group either individually or globally.
Note. Active alarms are identified by a flashing red 'Alarm Status' icon in the bottom
left hand corner of the associated channel indicator – see Fig. 2.4.
If neither alarm on a particular channel is configured, the short channel tag appears
greyed-out in the menu.
2 OPERATION...
11