CHAPTER 4: INTERFACES
745 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
Select the appropriate communications interface (Ethernet or Serial) and
fill in the required information for the 745. See EnerVista Software
Interface on page 4–8 for details.
Figure 4-6: Device setup screen (example)
Click the Read Order Code button to connect to the 745 device and
upload the order code.
If a communications error occurs, ensure that communications values
entered in the previous step correspond to the relay setting values.
Click OK when complete.
From the EnerVista main window, select the IED Dashboard item to
open the Plug and Play IED dashboard. An icon for the 745 will be
shown.
FIGURE 4–7: 'Plug and play' dashboard
USING ENERVISTA VIEWPOINT WITH THE 745
4–41