Huawei eSpace 6805 Administrator's Manual page 30

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Figure 2-7 Firmware Upgrade and Provisioning
3.
Figure 2-8 Upgrade Via
4.
Figure 2-9 Set DHCP Option43 and Option66 to override server
5.
Automatic Upgrade
eSpace 6805, eSpace 6810,eSpace 6830, eSpace 6850, and eSpace 6870 support automatic
upgrade.
1.
Figure 2-10 Automatic Upgrade
Issue 01 (2012-06-20)
Set the mode of eSpace 6805&6810&6830&6850&6870and the upgrade server. Select
TFTP in Upgrade Via and enter the TFTP server address in the Firmware Server Path
text box, namely, IP address of the computer where loading files are stored. The domain
name and IP address are supported.
Set Allow DHCP Option43 and Option 66 to override server to No.
If the parameter is set to Yes, the phone is allowed to obtain the firmware upgrade server
address when obtaining an IP address through the DHCP server. The configuration is
performed on the DHCP server. The obtained firmware upgrade server address
overwrites the value of Firmware Server Path set in
Click Update to save the setting and click Reboot to restart the IP phone. After being
restarted, the IP phone upgrades the version automatically.
----End
Set Automatic Upgrade to Yes in on the ADVANCED SETTINGS page and set the
proper interval for checking the version.
The default value is 1440, and the minimum value is 60, in minutes.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Configuration and Loading Files
Step 3.
25