Huawei eSpace 6805 Administrator's Manual page 18

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Field
Allow DHCP
Option 42 to
override NTP
server
Public Mode
SSL
Certificate
SSLPrivate
Key
SSLPrivate
Key Password
Distinctive
Ring Tone
System Ring
Tone
Call Progress
Tones
Disable Call
Waiting
Disable
Call-Waiting
Tone
Disable
Conference
Enable MPK
Issue 01 (2012-06-20)
Description
If this parameter is enabled, the DHCP server can override the NTP
server configured in the phone. This is used for ITSP or system
administrator. Users can ignore this parameter.
Indicates whether to enable the public mode. If this parameter is set to
Yes, the login window is displayed after a phone is powered on. Enter the
correct user name and password to enter the standby mode. The user
name and password are those of the corresponding SIP account.
If this parameter is set to No, a phone directly enters the standby mode
after being powered on.
SSL certificate required for accessing some resources.
Private key for SSL verification.
Private key password for SSL verification.
Three customized ring tones can be configured. Therefore, distinctive
ring tone is played when an incoming call from a specified user comes.
Enter a specific ID in the text box. When a ring tone is selected and a
calling party ID is set, the device only plays this ring tone when the
incoming call is the number of the preset calling party ID. The device
will use the system ring tone for all other calls.
System ring tone: the North American standard is adopted by default.
The user can adjust the system ring tones frequencies and cadences based
on their countries telecom standard.
These settings can be configured through various call progress tone
frequencies and cadences according to the standard of country where the
phone is located.
By default, call progress tones are set to North American standard.
Frequencies must be configured with known values to avoid
uncomfortable high pitch sounds. ON is the period of ringing (the unit of
On time is ms) while OFF is the period of silence. In order to set a
continuous ring, OFF must set be to zero. Otherwise, it rings ON ms and
a pause of OFF ms and repeats the pattern. A maximum three cadences
are supported.
The default value is No. If the parameter is set to Yes, the call waiting
function is disabled.
The default value is No. If the parameter is set to Yes, the call waiting
tone is not played to remind user when there is an incoming call, and only
the LED blinks as the reminder.
The default value is No. If the parameter is set to Yes, the three-party
conference function of eSpace 6870 is disabled.
The default value is No. If the parameter is set to Yes, multi-purpose keys
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Configuration and Loading Files
13