Setup; Activating And Charging The Battery - Toro 07050 Operator's Manual

Setup

Loose Parts
Use the chart below to verify that all parts have been shipped.
Procedure
1
2
3
Media and Additional Parts
Description
Operator's Manual
Engine Operator's Manual
Parts Catalog
Note: Determine the left and right sides of the machine
from the normal operating position.
1
Activating and Charging the
Battery
No Parts Required
Procedure
WARNING
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead compounds,
chemicals known to the State of California
to cause cancer and reproductive harm.
Wash hands after handling.
1. Unlatch and open the battery compartment cover.
2. Remove the battery from the battery compartment.
3. Clean the top of the battery and remove the vent
caps.
Description
No parts required
Bolts
Locknuts
No parts required
Qty.
–
2
2
–
Qty.
1
Read before operating the machine.
1
1 View and order parts.
4. Carefully fill each cell with electrolyte until the
electrolyte is up to the fill line.
Use only electrolyte (1.260 Specific Gravity) to fill
the battery initially.
Important: Do not add electrolyte while the
battery is in the machine. You could spill it,
causing corrosion.
DANGER
Battery electrolyte contains sulfuric acid which
is a deadly poison and causes severe burns.
• Do not drink electrolyte and avoid contact
with skin, eyes, or clothing. Wear safety
glasses to shield your eyes and rubber gloves
to protect your hands.
• Fill the battery where clean water is always
available for flushing the skin.
5. Connect a 3 to 4 amp battery charger to the battery
posts. Charge the battery at a rate of 3 to 4 amps
for 4 to 8 hours.
6. Remove the filler caps and slowly add electrolyte to
each cell until the level is up to the fill line. Install
the filler caps.
Important: Do not overfill the battery.
Electrolyte will overflow onto other parts of the
machine and severe corrosion and deterioration
will result.
8
Use
Activate and charge the battery.
Mount sweeper to prime mover.
Removing sweeper from prime mover.
Use