Toro 30410 Operator's Manual page 18

Temperature Override Switch
Press and hold the reset switch (Figure 4) to start
the engine after high temperature shut down. Use
only for emergency operation.
Audible Alarm
The alarm (Figure 4) is activated when the low
engine oil pressure light illuminates or the high
coolant temperature light illuminates.
Alarm Silence Switch
This switch (Figure 4) shuts off the audible alarm.
Specications
Note: Specifications and design are subject to change without notice.
Width of cut
overall
front cutting unit
side cutting unit
front and one side cutting
unit
Overall width
cutting units down
cutting units up (transports)
Overall length
Height
Height with ROPS
Ground clearance
Wheel tread (to center of tire)
front
rear
Wheel base
Weight (with cutting units and
uids)
Attachments/Accessories
A selection of Toro approved attachments and
accessories are available for use with the machine
to enhance and expand its capabilities. Contact
your Authorized Service Dealer or Distributor or
go to www.Toro.com for a list of all approved
attachments and accessories.
Throttle Control
Move the control (Figure 4) forward to increase the
engine speed and rearward to decrease the speed.
Power Point
The power point (Figure 4) is used to power
optional electrical accessories.
132 inch (335 cm)
62 inch (157 cm)
42 inch (107 cm)
97 inch (246 cm)
136 inch (345 cm)
72 inch (183 cm)
135 inch (342 cm)
55 inch (140 cm)
81 inch (206 cm)
6-1/2 inch (17 cm)
45 inch (114 cm)
47 inch (119 cm)
55-1/2 in (141 cm)
3860 lb (1751 kg)
18