G Structure Of The Operation Conditions Menu; Structure Of The Operation Conditions Menu - Sharp AR-C260P Operation Manual

Structure of the operation conditions menu

The settings under "SET OPERATING CONDITIONS" are arranged as shown below.
Press the [ ] key or [ ] key to move through the settings in any level of the menu.
To select a setting or store a selection for setting, press the [OK] key.
To move back to the previous level after completing a setting or to cancel the selection of a setting, press the
[BACK/C] key.
To correct an accidental selection, press the [BACK/C] key.
After the [OK] key is pressed to store a setting, an asterisk "
SET OPERATING
CONDITIONS
LEVEL1
[OK] [OK]
DEFAULT SETTINGS
[BACK/C]
[ ] [ ]
PCL SETTINGS
[ ] [ ]
PRINT PS ERRORS
CONFIGURING THE OPERATION CONDITION SETTINGS
" will appear next to the setting.
LEVEL2
[OK]
COPIES
[BACK/C]
[ ] [ ]
ORIENTATION
[ ] [ ]
DEFAULT PAPER SIZE
[ ] [ ]
DEFAULT PAPER TYPE
[ ] [ ]
DEFAULT OUTPUT TRAY
[OK]
PCL FONT
[BACK/C]
[ ] [ ]
PCL SYMBOL SET
[OK]
[BACK/C]
Select and store settings
[OK]
To configure a setting,
use the key or key
[BACK/C]
to choose the desired
selection for the setting
[OK]
and then press the [OK]
key to store the setting.
[BACK/C]
An asterisk " " will
[OK] appear next to the
setting. To correct a
mistake, press the
[BACK/C]
[BACK/C] key. For the
[OK]
selections for each
setting, see pages 3-4
[BACK/C]
and following.
[OK]
[BACK/C]
[OK]
[BACK/C]
[OK]
[BACK/C]
3
3-3