Main Features - Sharp AR-C260P Operation Manual

MAIN FEATURES

1 Brilliant full colour printing based on digital image processing
Prints high-resolution 600 dpi images in brilliant full colour at a blazing speed of 26 pages per minute (A4 or letter
size). Black and white printing is even faster at 32 pages per minute* (A4 or letter size).
* When the same document is printed repeatedly without using the offset function.
2 A range of optional units to enhance productivity
A range of optional equipment is available to enhance productivity, such as duplex units for producing two-sided
output, additional paper feed units to increase the number of available paper sizes and paper capacity, and
paper output units that are capable of stapling and saddle stitch binding.
Standard offset function makes it easy to distinguish between sets of prints
3
As sets of prints are delivered to the centre tray, each set is offset from the previous set for easy separation.
4 PostScript compatible
Installation of an optional PS3 expansion kit (AR-PK4) gives PostScript compatibility (PostScript 3).
Energy saving features
This product has the following two power reducing modes that conform to the
Energy Star guidelines to help conserve natural resources and reduce
environmental pollution.
Preheat mode
The preheat mode is the first level of power reduction. The power is reduced
to the fuser unit a preset time after the machine has completed a job and no
further machine operations have been performed. The machine can recover
to the ready condition within a short period of time. The preset time to enter
the mode can be set by a key operator program.
Auto power shut-off mode
The auto power shut-off mode is the second level of power reduction. In this mode power is shut off to the
fusing unit and the message display. In this state more energy is saved than in the preheat mode but the
time to recover to the ready condition will be longer. The preset time to enter this mode can be set by a key
operator program.
When either of the above modes is active, the mode will be deactivated automatically by an incoming job and
the machine will automatically warm up and start to print when it has reached the ready temperature.
Either mode will also be deactivated by any key operation on the operation panel.
E S
®
As an NERGY TAR
Partner, SHARP has
determined that this product
E
meets the NERGY
S ®
TAR guidelines for
energy efficiency.
1-3
1